Tumbler Heat Press Attachment 20 oz for 110 V Mug Press Sublimation Machine 4-pin

Features: Voltage: The voltage of the heating transfer pad is 110V, our hole spacing is 8cm/3.14 inches, and the machine specifications of each manufacturer are different. Our accessory is 20 oz and 30 oz, which are fixed size. Depending on the machine's hole spacing, the holes can be drilled using a screwdriver. Easy to operate: 1. Select or design the image and clean the surface of the cup. 2. Wrap the cup with the image so that the image is centered and symmetrical on both sides. Stick to the paper with thermal tape. 3. Place the cup in the center of the heating pad. 4. Adjust the pressure ball of the print cup, not too tight or too loose, and then close the handle. 5. Turn on the power, adjust the instrument time about for 200S to 300S, the temperature is about 180 to 200 degrees Celsius. 6. Press the timing button to stop when the countdown ends. 7. Remove the cup and peel off the paper, and the beautiful cup you made is finished. Specification: Material: iron sheet and silica gel Size: approx 8.3 x 9.8 inches/ 21 x 25 cm; 10 x 9.2 inches / 27 x 23.5 cm Capacity: 20 oz/ 30 oz Warm note: Please note, this heat press transfer machine is not suitable for minors to use or food processing. Please make sure there will be a mug in the heating element when you turn on power. Manual measurement, please allow slight errors on size. The color may exist slight difference due to different screen displays. Full printing requires turning the cup half a circle and printing again

• Please ensure that your press is a 4 pin press. Not compatible with 5 pin.
• Male Plug: the voltage of male plug is 110V, please check that your plug is the same as picture show. And this heat press transfer machine is not suitable for minors to use or food processing.
• Two openings are reserved for quick installation and replacement. Reliable material: The outside of the tumbler hot-pressing attachment is made of a sufficiently strong iron sheet, and the inside is made of silica gel to ensure stable thermal stability; the surface of the electric heating film is smooth and insulated, which effectively protects the surface of the cup body from cracking and enhances the hardness of the machine.
• Easy to use: First, you can choose or design the image you want, then wrap the cup with the image and stick it on the paper with thermal tape; next, place the cup in the center of the heating pad, turn on the power, and wait for a while; Finally, turn on the press, take out the cup, tear off the paper, and the beautiful cup is done; you can print cups with different patterns, which are wonderful holiday gifts for friends and relatives